Click image to view full size image
Pipe bending machine
Suitable area:This machine is a high-powered bending machine and adopts numerical control, various groups of programs and muti-angle settings which can make the operation easy and convenient. It is widely used in many areas. It can be used for products which are in mass production and standardized production, such as vent-pipes, chair bumper and all the steel furniture, etc. Inquiries are welcome at any time
| Main specification | unit | Model:DW75NC | Notes |
| Max bending capability | mm | Φ75×4 | 1.Min bending radius is based on the pipe diameter. 2.Max bending radius can be designed according to clients' requirements. 3. Max effective distance of mandrel can be designed according to clients' requirements. |
| Max bending radius | mm | R400 | |
| Min bending radius | mm | R40 | |
| Max bending angle | Degree | 190 | |
| Max effective distance of mandrel | mm | 2800 | |
| Control system | Numerical control | ||
| Max quantity of elbow | Unit | 16 | |
| Max storable section | Unit | 16×16 | |
| Motor power (Oil pressure) | KW | 7.5 | |
| Max system pressure | Mpa | 12 | |
| Hydraulic system control | Electromagnetic valve | ||
| Tank capacity | L | 250 | |
| Dimension of the machine | mm | 4000×1000×1100 | |
| Weight of the machine | Kg | 2000 |
Steel round pipe bending machine
